SprayMax - 1K AC Primerfiller medium grey (400 ml)

SKU: 15-680282

Category: Acrylic Filler

GTIN: 4015962855991

Medium grey acrylic filler with good stability, faster drying and excellent dry-sanding properties. Ideal for spot repairs. Can be used on steel, galvanised steel, aluminium and various plastics.

15,49 €

38,72 € per 1 l

incl. 19% VAT , plus (Standard)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Acrylic filler with good stability, faster drying and excellent dry-sanding properties. Ideal for spot repairs. Can be used on steel, galvanised steel, aluminium and various plastics.

Advantages

Excellent filling properties
Good stability
Excellent dry-sanding properties
Can be painted over with all standard 1K base coats and 2K top coat systems; especially suitable for water-based paints

Application

Spot repair and sanded-through spots
Insulation filler under water borne paints
Bare sanded-through spots in 2K filler or in 2K old paint jobs
Putty spots sanded and cleaned roughened and cleaned factory primings roughened and cleaned factory or old paint jobs can be used on nearly all plastics. Pretreat parts with plastic adhesion promoter beforehand.

Pre-treatment

Completely derust the damaged area, thoroughly clean, grind the surface and clean with SprayMax Silicone Remover.
Damaged area mbe free of fat and dust and be dry
Shake the can well for 2 min. Perform a trial sprayust .
Large bare areas must be pre-primed with acid primer

Spray application:

2–3 = 30–50µm
Interim flash off time between the spray applications: 1–5min

Drying times

Air dry drying 15 min / 20°C
IR drying possible: 3 min. (short-wave IR radiation)

Post treatment:

Wet sanding with P800 or dry grind sand down with P400–500
Can be painted over with all commercial fillers and topcoats

Notes

To be used by specialists only
Wear personal protection gear (respirator type: A2/P2 safety gloves, e.g. Latex or nitrile)
After finishing the painting process, turn the can over and spray the valve empty.
Dispose of the completely empty spray cans as recyclable material

Labelling according to Regulation (EC) No 1272/2008:

General notes:

(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P103) Read label before use. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P261) Avoid breathing dust/fume/gas/mist/vapours/spray. (P271) Use only outdoors or in a well-ventilated area. (P302) IF ON SKIN: (P352) Wash with plenty of water. (P305) IF IN EYES:(P351) Rinse cautiously with water for several minutes. (P338) Remove contact lenses, if present and easy to do. Continue rinsing. (P312) Call a poison center/doctor if you feel unwell. (P333) If skin irritation or rash occurs:(P313) Get medical advice/attention. (P337) If eye irritation persists:(P313) Get medical advice/attention. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F. (P501) Dispose of contents/container to …

Hazard statements:

(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated. (H315) Causes skin irritation. (H319) Causes serious eye irritation. (H317) May cause an allergic skin reaction. (H336) May cause drowsiness or dizziness.

Hazard pictograms:

Signalword: Danger

Properties:	Schweißbar
System Components:	1C
Content:	0,40 l
a1:	82483031

Contact data

Title - optional

First name

Last name

Firm - optional

E-Mail

Phone - optional

Fax - optional

Question about item

Your question

I agree that my data as stated herein will be stored and processed for the purpose of facilitating communication with me. ()

Please note: This consent can be revoked at any time by message to us. In case of revokation your data will be deleted immediately. For more information, please read the Privacy Policy.