presto contact spray is the reliable way to avoid contact resistance, leakage current and voltage losses in electrical connections. It also ensures a smooth current.
Application areas:
electrial connections, radios, televisions, tools, cabling, connections
Quality and Properties
- Water and moisture are infiltrated and displaced
- Excellent adhesion and penetration
- Protects contacts and prevents corrosion
- Resistant to water, salts and weak bases
- Directed jet spray
- This product is equipped with a special cap, which contains a tube and a spray nozzle that can be used to reach inaccessible places.
- Observe TRG 300
Physical and Chemical Data
- Colour: yellow/transparent
- Propellant: propane/butane
- Density at 20°C: 0,664 g/ml
- Vapour pressure at 20°C: 4 - 4,5 bar
- Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
- Size: aerosol can, maximum nominal volume 400 ml
Environment and Labelling
- Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
- Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
- Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Using Instructions
- Before use, carefully read and observe the warning texts on the label!
Application:
- Make sure can is at room temperature.
- Application temperature 5 ° to 30 ° C.
- Switch electrical equipment off before treating.
- Surfaces must be clean, dry and free of grease.
- Shake can well before use.
- Spray several thin layers on connectors, cables, distributor caps, etc.