belton Granite effect obsidian
Amazingly real, solid, granite look. This special spray lends decoration objects of all kinds a typical stonelike, solid and upmarket granite effect. An amazing transformation, in particular on objects not typically made of stone. Stone design for indoors and outdoors. The product can
be used on a wide variety of materials. Always coat with belton clearcoat for all effects.
Application
To lend decoration objects a solid granite look. For objects made of metal, wood, plastics, polystyrene, stone, clay, ceramics, glass as well as rattan/bast and card/paper etc.
Wood, metal, ceramics, stone, clay and plastics that can be painted
Product benefits
- Massive granite effect in a stone design (life-like)
- Transformation of untypical stone objects
- High coverage and fast drying
- Easy to process and smooth running properties
- Very economic and water-based
- Weatherproof, for indoors and outdoors
- Ideal for untypical stone objects such as plant pots, garden figures, decoration balls etc.
- Recommendation: Coat with belton clearcoat for all effects
Spray application
for 1-2 cross coats: 120-150 µm
Spray distance: 40-50 cm
Drying times
between the separate coats: approx. 30 min.
dust-dry: after approx. 2 hours
fast-to-handling: after approx. 12 min.
dry-hard: after approx. 48 hours
Recoating
with itself: at any time
with clearcoat for all effect paints: after approx. 6 hours
Note
Recommendation: Always coat with clearcoat for all effects to seal the granite effect in the long-term.
Please check the compatibility of plastic surfaces. All other surfaces, such as e.g. stone, clay, ceramics, glass, rattan/bast, card/paper need to be primed with belton universal primer.
The surface to be painted must be clean, dry and free of grease.
Do not spray onto objects coated with artificial resin because the paint may lift.
Labelling according to Regulation (EC) No 1272/2008:
General notes:
(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P103) Read label before use. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F. (P501) Dispose of contents/container to …
Hazard statements:
(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated.
Hazard pictograms:
Signalword: Danger
Product Safety:
Manufacturer Information
Peter Kwasny GmbH
Heilbronner Straße 96
74831 Gundelsheim
Baden-Württemberg
Deutschland
info@kwasny.de
https://www.belton.de
