Application:
Surfaces must be smooth, clean, dry and grease-free. If necessary, sand uneven surfaces. Apply a full coat of rust effect. An orange undercoat (our recommendation belton spectRAL, Art.-No.324032) enhances the rust effect. For indoors and outdoors. Resistant to weather, scratching and impacts. High coverage and very good adhesion. Can be painted over.
Product benefits:
Unique rust effect for all kinds of painted objects For a rough, rust-like surface structure Orange primer optimises the rust effect High coverage and good adhesion Fast drying and easy processing Ideal for hobbies, decorative tasks and DIY work Can be painted over with 1K topcoats (colour shade).
Binding agent base:
Nitro combination resins
Spray application:
- Without primer (with orange)
- 2-3 thin coats: approx. 20 - 30 µm
- Spray distance: 15-25 cm
- With primer (orange)
- Prime with full even coats of an orange primer
- Then apply 2-3 thin spray coats of the belton Rest effect onto the wet primer
Drying times:
- dust-dry: after approx. 10 min.
- fast-to-handling: after approx. 15-20 min.
- dry-hard: after approx. 12 hours
Recoating:
- with itself: at any time
- with 1K topcoats (colour tone): After 12 hours drying time
Paint structure:
Metal:
1. belton basic universal primer (optional)
2. Pre-coat in orange (Recommendation: belton spectRAL orange, Art.No. 324032 (optional)
3. belton special Rust effect
4. Can be painted over with 1K topcoat, colour tone (optional)
Wood: 1. belton basic wood primer
2. Pre-coat in orange (Recommendation: belton spectRAL orange, Art.No. 324032 (optional)
3. belton special Rust effect
4. Can be painted over with 1K topcoat, colour tone (optional)
Plastic: 1. belton basic plastics primer
2. Pre-coat in orange (Recommendation: belton spectRAL orange, Art.No. 324032 (optional)
3. belton special Rust effect
4. Can be painted over with 1K topcoat, colour tone (optional)
Polystyrene:
1. belton basic polystyrene primer
2. Pre-coat in orange (Recommendation: belton spectRAL orange, Art.No. 324032 (optional)
3. belton special Rust effect
4. Can be painted over with 1K topcoat, colour-tone (optional)
Note:
Please check the compatibility of plastic surfaces. All other surfaces, such as e.g. stone, clay, ceramics, glass, rattan/bast, card/paper need to be primed with belton universal primer. Do not spray onto synthetic resin coated surfaces because the paint may lift. The surface to be painted must be clean, dry and free of grease.
Product Safety:
Manufacturer Information
Peter Kwasny GmbH
Heilbronner Straße 96
74831 Gundelsheim
Baden-Württemberg
Deutschland
info@kwasny.de
https://www.belton.de
.jpg)
