presto Synthetic Adhesive Lube is a spray grease for lubrication of metal and plastics mechanical parts. By the excellent mechanical and thermal stability prevent wear and sticking of joints. The spray suppresses noises and provides good for corrosion.
Application areas:
joints, hinges, door locks, etc.
Quality and Properties
- Prevents wear and sticking
- Excellent adhesion and creep power
- Suppresses noises
- High viscosity
- O-ring neutral, i.e. does not attack seals
- Good corrosion resistance
- Excellent mechanical and thermal stability
- Leaves a sticky surface
- Extremely weather resistant
- Resistant to salts, dilute acids and alkalis
- Water-repellent
- Contains PTFE
- Directed jetspray
- This product is equipped with a special cap. The cap contains a tube and a spray nozzle for directed application in inaccessible places.
- Attend the TRG 300
Physical and Chemical Data
- Basis of the binder: calcium-grease
- Colour: white
- Relative density at 20°C: 0,665 g/ml
- Vapour pressure at 20°C: 3 - 4 bar
- Drop point: 42°C to 60°C
- Temperature resistance: -30°C till +180°C
- pH-value: neutral
- Storage stability: 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
- Size: aerosol cans, maximum nominal volume 400 ml
Environment and Labelling
- Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
- Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
- Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Using Instructions
- Before use, carefully read and observe the warning texts on the label!
Application
- The aerosol should have room temperature.
- Best processing temperature 5 to 30°C.
- Before application we recommend the cleaning with presto Assembly Cleaner.
- Shake can thoroughly before use.
- Synthetic Adhesive Lube apply on all parts which shall be treated.
- After the evaporation of the solvent a soft, extremely adhesive lubricant film develops.