Belton-vintage-paint
For decorative paintwork to achieve a vintage look on combination with sandpaper (recommended P180). Ideal for objects made of wood and metal. It also can be used on other surfaces e.g. plastic or glass. In the case of plastics, we recommend the use of the belton plastics primer and for glass, the belton universal primer.
Product benefits
- Colour: line white
- Waterbased spraypaint
- Individual design options
- Fast drying and high coverage
- Further treatment with sandpaper creates the vintage look (recommended P180)
- Suitable for indoor, partially outdoor use
Specifications
- Special water-based dispersion
- For 2-3 spray coats: ca. 30-40 µm
- Spray distance: 15-25 cm
- dust-dry: after approx. 10 min.
- can be sanded: after approx. 20 min.
- dry-hard: after approx. 12 hours
Paint structure wood
1. Roughen slighting (better adhesion)
2. belton special Vintage paint
3. Sand with sandpaper (recommended P180)
4. belton clearcoat (optional)
Paint structure metal
1. Remove rust, sand/roughen
2. belton special vintage paint
3. Sand with sandpaper (recommended P 180)
4. belton clearcoat (optional)
Paint structure plastic
1. belton plastic primer
2. belton special vintage paint
3. Sand with sandpaper (recommended P180)
4. belton clearcoat (recommended
)
Paint structure Old paint
1. Sand old paint, check compatibility
2. belton universal primer
3. belton special vintage paint
4. Sand with sandpaper (recommended P180)
5. belton clearcoat (recommended)
Note
Please check the plastic surfaces for compatibility. Prime all other surfaces such as stone, clay, ceramic, rattan/ bast, card/ paper with the belton universal primer: Do not spray onto surface coated with artificial resin because it might cause the paint to lift. The surfaces must be clean, dry and grease-free before they are painted.
Labelling according to Regulation (EC) No 1272/2008
General notes
(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P103) Read label before use. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P305) IF IN EYES:(P351) Rinse cautiously with water for several minutes. (P338) Remove contact lenses, if present and easy to do. Continue rinsing. (P337) If eye irritation persists:(P313) Get medical advice/attention. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F.
Hazard statements
(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated. (H319) Causes serious eye irritation.
Hazard pictograms
Signalword: Danger
Product Safety:
Manufacturer Information
Peter Kwasny GmbH
Heilbronner Straße 96
74831 Gundelsheim
Baden-Württemberg
Deutschland
info@kwasny.de
https://www.belton.de
