belton metallic effect spray
For creating a unique metallic effect that changes the character of the painted objects lending them a high-quality and solid appearance. Decorative effect paint for indoors and outdoors with excellent weatherresistance. Recommendation: Coat with belton clearcoat
Application
For decorative paint coats in a metallic effect. For painted objects made of metal, wood, plastics, polystyrene, stone, clay, ceramics, glass as well as rattan/bast and card/paper etc.
Product benefits
- Shiny metallic effects
- Upgrades the appearance of painted objects
- High coverage and fast drying
- Very good running properties and easy to process
- Weatherproof, for indoors and outdoors
- Very economic
- Ideal for home decorating, hobby, workshop, e.g. letterboxes, newspaper pipes etc.
- Recommendation: Paint over with belton clearcoat
Spray application
- for 2-3 cross coats: approx. 40 – 50 µm
- Spray distance: 15-25 cm
Drying times
- dust-dry: after approx. 20 min.
- fast-to-handling: after 60 min.
- dry-hard: after approx. 12 hours
Note:
Recommendation:
Paint over with clearcoat for all effects. Please check the compatibility of plastic surfaces. All other surfaces, such as e.g. stone, clay, ceramics, glass, rattan/bast, card/paper need to be primed with belton universal primer. Do not spray onto synthetic resin coated surfaces because the paint may lift. The surface to be painted must be clean, dry and free of grease.
Labelling according to Regulation (EC) No 1272/2008:
General notes:
(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P103) Read label before use. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P261) Avoid breathing dust/fume/gas/mist/vapours/spray. (P271) Use only outdoors or in a well-ventilated area. (P305) IF IN EYES:(P351) Rinse cautiously with water for several minutes. (P338) Remove contact lenses, if present and easy to do. Continue rinsing. (P312) Call a poison center/doctor if you feel unwell. (P337) If eye irritation persists:(P313) Get medical advice/attention. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F. (P501) Dispose of contents/container to …
Hazard statements:
(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated. (H319) Causes serious eye irritation. (H336) May cause drowsiness or dizziness.
Hazard pictograms:
Signalword: Danger
Product Safety:
Manufacturer Information
Peter Kwasny GmbH
Heilbronner Straße 96
74831 Gundelsheim
Baden-Württemberg
Deutschland
info@kwasny.de
https://www.belton.de
