Spray Max - 2K Rapid Primer Filler spray grey (250ml)

SKU: 15-684031

Category: Fillprimer

GTIN: 4015962855083

Universal, quick drying 2 component priming for high quality vehicle paint jobs. Ideal for parts-painting and spot-repairs.

19,90 €

79,60 € per 1 l

incl. 19% VAT , plus (Standard)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Technical Information

Application:

Universal priming for fixing up small and medium sized areas (spot repair and part painting)

Substrates:

Bare sheet metal, cleaned and sanded
UP putty, cleaned and sanded
Old paint, cleaned and sanded

Pretreatment:

If necessary, derust substrate well beforehand. Grind substrate and clean with SprayMax Silicone Remover

Activate 2K:

Shake the can well for 2 min. before activating
Remove the red push button from the cap
Turn can 180° and put the push button on the pin in the can bottom
Turn the can with the cap upside down onto a stable base
Press the trigger button with the ball of your thumb until the limit
After activating, shake can well for 2 min. once again

Spray application:

2–3 spray applications
Approx. 30µm per spray application
Flash off time between the sprays: 5-10min depending on temperature

Drying times:

Can be wet-in-wet overpainted after approx. 20min air drying
Sandable: 1 hour at 20°C; 30 min at 60°C
IR drying possible

Application life:

24 hours at 20°C room temperature
The application life depends on the ambient temperature.
Higher temperatures lead to shortened, lower temperatures to a longer pot life

Post treatment:

Can be wet-in-wet overpainted after approx. 20min air drying
or wet sanded with P800
Dry sanding with excentre and P400
Recoatable with all commercial grade 1K + 2K paints

Yield:

400ml: Approx. 0.5m² - 1m² / spray can depending on the application thickness and substrate
250ml: Approx. 0.3m² - 0.6m² / spray can depending on the application thickness and substrate

Notes:

To be used by specialists only
Wear personal protection gear (respirator type: A2/P2 safety gloves, e.g. Latex or nitrile)
After finishing the painting process, turn the can over and spray the valve empty.
Dispose of the completely empty spray cans as recyclable material

Labelling according to Regulation (EC) No 1272/2008:

General notes:

(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P103) Read label before use. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P261) Avoid breathing dust/fume/gas/mist/vapours/spray. (P271) Use only outdoors or in a well-ventilated area. (P273) Avoid release to the environment. (P305) IF IN EYES:(P351) Rinse cautiously with water for several minutes. (P338) Remove contact lenses, if present and easy to do. Continue rinsing. (P312) Call a poison center/doctor if you feel unwell. (P337) If eye irritation persists:(P313) Get medical advice/attention. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F. (P501) Dispose of contents/container to …

Hazard statements:

(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated. (H319) Causes serious eye irritation. (H336) May cause drowsiness or dizziness. (H412) Harmful to aquatic life with long lasting effects.

Hazard pictograms:

Signalword: Danger

Color:	grey
Substrate:	Metall
System Components:	2C
Content:	0,25 l
a1:	82483031

Contact data

Title - optional

First name

Last name

Firm - optional

E-Mail

Phone - optional

Fax - optional

Question about item

Your question

I agree that my data as stated herein will be stored and processed for the purpose of facilitating communication with me. ()

Please note: This consent can be revoked at any time by message to us. In case of revokation your data will be deleted immediately. For more information, please read the Privacy Policy.