Spray Max - 2K Rapid Primer Filler spray grey (400ml)

Item number: 15-680031

EAN: 4015962854000

Universal, quick drying 2 component priming for high quality vehicle paint jobs. Ideal for parts-painting and spot-repairs.

Category: Express Primer

£ 17,08
£ 42,71 per 1 l

including 16% VAT. , plus shipping (Standard)

Shipping time: 1 - 2 workdays

Technical Information


  • Universal priming for fixing up small and medium sized areas (spot repair and part painting)


  • Bare sheet metal, cleaned and sanded
  • UP putty, cleaned and sanded
  • Old paint, cleaned and sanded


  • If necessary, derust substrate well beforehand. Grind substrate and clean with SprayMax Silicone Remover

Activate 2K:

  • Shake the can well for 2 min. before activating
  • Remove the red push button from the cap
  • Turn can 180° and put the push button on the pin in the can bottom
  • Turn the can with the cap upside down onto a stable base
  • Press the trigger button with the ball of your thumb until the limit
  • After activating, shake can well for 2 min. once again

Spray application:

  • 2–3 spray applications
  • Approx. 30µm per spray application
  • Flash off time between the sprays: 5-10min depending on temperature

Drying times:

  • Can be wet-in-wet overpainted after approx. 20min air drying
  • Sandable: 1 hour at 20°C; 30 min at 60°C
  • IR drying possible

Application life:

  • 24 hours at 20°C room temperature
  • The application life depends on the ambient temperature.
  • Higher temperatures lead to shortened, lower temperatures to a longer pot life

Post treatment:

  • Can be wet-in-wet overpainted after approx. 20min air drying
  • or wet sanded with P800
  • Dry sanding with excentre and P400
  • Recoatable with all commercial grade 1K + 2K paints


  • 400ml: Approx. 0.5m² - 1m² / spray can depending on the application thickness and substrate
  • 250ml: Approx. 0.3m² - 0.6m² / spray can depending on the application thickness and substrate


  • To be used by specialists only
  • Wear personal protection gear (respirator type: A2/P2 safety gloves, e.g. Latex or nitrile)
  • After finishing the painting process, turn the can over and spray the valve empty.
  • Dispose of the completely empty spray cans as recyclable material

Labelling according to Regulation (EC) No 1272/2008:

General notes:

(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P103) Read label before use. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P261) Avoid breathing dust/fume/gas/mist/vapours/spray. (P271) Use only outdoors or in a well-ventilated area. (P273) Avoid release to the environment. (P305) IF IN EYES:(P351) Rinse cautiously with water for several minutes. (P338) Remove contact lenses, if present and easy to do. Continue rinsing. (P312) Call a poison center/doctor if you feel unwell. (P337) If eye irritation persists:(P313) Get medical advice/attention. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F. (P501) Dispose of contents/container to …

Hazard statements:

(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated. (H319) Causes serious eye irritation. (H336) May cause drowsiness or dizziness. (H412) Harmful to aquatic life with long lasting effects.

Hazard pictograms:

Exclamation markFlame
Signalword: Danger

Color: grey
Contents: 0,40 l
a1: 82483031

Average product review

Write your first review and help others with their purchase decision:

Question on item

Sicherheitsdatenblatt REZ528

Sicherheitsdatenblatt (SDB) mit der Nummer REZ528.

Sicherheitsdatenblatt REZ528