SprayTec - Bitumen black (2,5kg)

Item number: 15-235601

EAN: 4015962094253

SprayTec underbody protection bitumen black is a top quality bitumen-based underbody coating material specially developed for drip-free use for immediate processing as a ready-to-spray funnel bottle with the suction air or airless gun. Protects the car reliably against rust, road salt, water, ice and snow. SprayTec underbody protection bitumen has excellent corrosion resistance (in acc. with DIN 53210SS, salt spray test 200 hours), excellent adhesion and excellent wear resistance. The product is elastic and has excellent anti-noise properties. Effective protection against heat and cold, can be used between 5°C and 35°C. Can be painted over. Touch-proof after approx. 2 hours, dry hard after 24 hours. Application fields are underbodies and wheel houses from the fields cars, lorries, caravans and tanks, boats etc. Thanks to a thick, elastic layer, the vehicle is permanently protected against mechanical and chemical agents.

Category: Underbody-protection

32,01 €
12,80 € per 1 kg

including 19% VAT. , plus shipping (Standard)

Shipping time: 1 - 2 workdays



  • Top quality bitumen-based underbody protection
  • SprayTec underbody protection Bitumen protects reliably against stone chipping, road salt, rust, water, ice, snow and corrosion.

Application fields:

  • For cars, lorries, vehicles, machines, caravans, tanks, boats etc. near the underbody and wheel houses

Product benefits:

  • Excellent corrosion resistance in acc. with DIN 53210SS
  • Salt spray test 200 hours
  • Excellent adhesion
  • Excellent wear resistance
  • Very high elasticity
  • Provides effective protection against heat and cold (can be used between 5 - 35°C)
  • Provides long-lasting protection against mechanical and chemical agents
  • Anti-noise set effectively

Drying times:

  • Completely dried after 24 hours
  • Touch-proof after approx. 2 hours


  • Shake can well for 3 minutes before use
  • Test spray first
  • Spray several layers of the product on from a distance of 20-30 cm in cross-coats
  • Generously tape over any areas that should not be sprayed
  • Do not spray onto the engine, gears, brakes and exhaust pipe
  • The treated surface needs to be thoroughly cleaned of penetrating oil, tar and residual wax
  • Can be removed with removal white spirit
  • Remove any splashes on the car body immediately with a cloth soaked in petrol or white spirit
  • After use, turn the can upside down and spray until the valve is empty
  • Clean all used tools properly

Labelling according to Regulation (EC) No 1272/2008:

General notes:

(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P103) Read label before use. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P260) Do not breathe dust/fume/gas/mist/vapours/spray. (P271) Use only outdoors or in a well-ventilated area. (P273) Avoid release to the environment. (P280) Wear protective gloves/protective clothing/eye protection/face protection. (P303) IF ON SKIN (or hair):(P361) Take off immediately all contaminated clothing. (P353) Rinse skin with water/shower. (P312) Call a poison center/doctor if you feel unwell. (P501) Dispose of contents/container to …

Hazard statements:

(H226) Flammable liquid and vapour. (H336) May cause drowsiness or dizziness. (H373) May cause damage to organs. (H412) Harmful to aquatic life with long lasting effects.

Hazard pictograms:

Health hazardExclamation markFlame
Signalword: Danger

Contents: 2,50 kg
a1: 82483031
Question on item