MOTIP Aerosol Paint matt black (500ml)

SKU: 65-04006

Category: Pre-mixed lacquers

GTIN: 8711347040063

For contrast and partial lacquering, for example rally stripes at the car and many other purposes. Also applicable on rims and car body.

8,90 €

6,90 €

13,80 € per 1 l

incl. 19% VAT , plus (Standard)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Quality and properties

High-grade acrylic combi quality
Very good coverage
Excellent adhesion
Good flow, smooth surface
Quick-drying
Suitable for indoors and outdoors applications
Weather-resistant, light-proof, UV-resistant
Scratch-, shock- and impact-resistant
High surface hardness and good elasticiy
Polishable, dirt-resistand surface

Physical and chemical data

Basis of the binder: nitro-combi
Colour: black mat or glossy and white glossyd
Smell: solvent
Degree of gloss (at measurement angle 60° acc. to DIN 67530):
glossy: 80-85 gloss units
matt: 10-20 gloss units
Efficiency:
Depending on consistence and color of the ground:
500 ml are sufficient for approx. 1.6 m²
Drying time (at 20°C, 50% relative air humidity):
Dust-dry: after approx. 10 minutes
Dry to touch: after approx. 50 minutes
Cured: after approx. 24 hours
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
Temperature-resistant: up to 80°C
Storage stability:
10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
Size: aerosol cans, maximum nominal volume 500 ml

Environment and labelling

Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

The most presto spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the labels!

Application

Preparation of the ground:

Clean underground from dirt, fat and rust.
Fill and sand uneven surfaces.
If no filling with putty is necessary, apply a primer
Otherwise apply Filler on the fine-sanded filled surfaces. Before that, generously mask off the repair spot.
If bigger areas have to be repaired, we recommend to mask off edges of the car body.

Lacquering:

The surface has to be clean, dry and free from fat.
Mask off areas not to be painted.
Before use, shake the can vigorously for 3 minutes.
Test spray to check colour-matching.
The spray distance should be approx. 20-30 cm.
Spray several thin cross-coats in 3 - 5 minute intervals.
Do not spray over synthetic paints!

Tips for spray painting

Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

The aerosol can should have room temperature.

Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

Labelling according to Regulation (EC) No 1272/2008:

General notes:

(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P260) Do not breathe dust/fume/gas/mist/vapours/spray. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F. (P501) Dispose of contents/container to …

Hazard statements:

(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated. (H319) Causes serious eye irritation. (H336) May cause drowsiness or dizziness.

Hazard pictograms:

Signalword: Danger

Content:

0,50 l

Contact data

Title - optional

First name

Last name

Firm - optional

E-Mail

Phone - optional

Fax - optional

Question about item

Your question

I agree that my data as stated herein will be stored and processed for the purpose of facilitating communication with me. ()

Please note: This consent can be revoked at any time by message to us. In case of revokation your data will be deleted immediately. For more information, please read the Privacy Policy.