Belton Metal-Guard silver
Anti-corrosion primer and coloured or protective paint in one product (2-in-1 function). For iron, steel, wood and hardened, sanded-down old paintwork.
Product benefits
- Anti-corrosion and top coat in one
- Can be applied directly onto rust (remove loose rust first)
- Excellent corrosion protection
- Very good adhesion and very smooth running properties
- High layer thicknesses and high stability
- Excellent weather resistance, for indoors and outdoors
- Permanent seal, therefore also topcoat
Spray application
- for 3-4 cross coats: approx. 80-90 µm
- Spray distance: 15-25 cm
- Drying times: dust-dry: after approx. 60 min.
- fast-to-handling: after approx. 48 hours
- dry-hard: after approx. 3-4 days
Note: Do not spray onto synthetic resin coated surfaces because the paint may lift.
Labelling according to Regulation (EC) No 1272/2008:
General notes:
(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P103) Read label before use. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P261) Avoid breathing dust/fume/gas/mist/vapours/spray. (P271) Use only outdoors or in a well-ventilated area. (P305) IF IN EYES:(P351) Rinse cautiously with water for several minutes. (P338) Remove contact lenses, if present and easy to do. Continue rinsing. (P312) Call a poison center/doctor if you feel unwell. (P337) If eye irritation persists:(P313) Get medical advice/attention. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F. (P501) Dispose of contents/container to …
Hazard statements:
(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated. (H319) Causes serious eye irritation. (H336) May cause drowsiness or dizziness.
Hazard pictograms:
Signalword: Danger
