Spray Max - 2K Epoxy Primer Filler aerosol grey (400ml)

SKU: 15-680033

Category: Epoxy Primer Filler

GTIN: 4015962854710

Universally usable 2 component epoxy primer filler for all problematical substrates with as metal, non-ferrous metal, galvanized sheet plate and anodized aluminium surfaces.

24,16 CHF

60,41 CHF per 1 l

incl. 19% VAT , plus (Standard)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Technical Information

Application:

Spot repair and part painting

Substrates:

Bare sheet steel
Galvanised sheet steel
Aluminium, anodized aluminium
UP putty
Old paint jobs
GRP materials
Do NOT work 2K epoxy primer filler on acid primer

Pretreatment:

If necessary, remove existing rust. Grind substrate and clean with SprayMax Silicone Remover

Activate 2K:

Shake the can well for 2 min before activating
Remove the red push button from the cap
Turn can 180° and put the push button on the pin in the can bottom
Turn the can with the cap upside down onto a stable base
Press the trigger button with the ball of your thumb until the limit
After activating, shake can well for 2 min. once again

Spray application:

2 spray applications = approx. 70µm
Interim flash off approx. 10-15min.
Final flash off approx. 30min before furnace or IR drying
Dust dry: 15min at 20°C
Touch dry: 5h at 20°C

Drying times:

Sandable: 12h at 20°C or 30min at 60°C object temperature
Sandable after 1h IR drying
Dry sand with P400-P500
Wet sand with P800
after 20-30min / 20°C (as soon as matt stripped)

Application life:

Approx. 4 days at 20°C room temperature
The application life depends on the ambient temperature.
Higher temperatures lead to shortened, lower temperatures to a longer pot life.

Post treatment:

Recoatable with all commercial grade 1K and 2K paints
If the 2K epoxy primer filler is painted over after 24 hours, it has to be sanded beforehand
2K UP products Before reworking with 2K putty and high-build filler, maintain a drying time of 24h at room temperature or 30min at 60°C
Wet-in-wet processing
With commercially available topcoat and base paints after 25 to 30min. Recoatable drying at room temperature

Gloss level:

Matt

Yield:

Approx. 0.5m²–1m² / spray can depending on the application thickness and substrate

Notes:

Comment: To be used by specialists only
After finishing the painting process, turn the can over and spray the valve empty.
Dispose of the completely empty spray cans as recyclable material

Labelling according to Regulation (EC) No 1272/2008:

General notes:

(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P103) Read label before use. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P261) Avoid breathing dust/fume/gas/mist/vapours/spray. (P273) Avoid release to the environment. (P302) IF ON SKIN: (P352) Wash with plenty of water. (P305) IF IN EYES:(P351) Rinse cautiously with water for several minutes. (P338) Remove contact lenses, if present and easy to do. Continue rinsing. (P333) If skin irritation or rash occurs:(P313) Get medical advice/attention. (P337) If eye irritation persists:(P313) Get medical advice/attention. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F. (P501) Dispose of contents/container to …

Hazard statements:

(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated. (H315) Causes skin irritation. (H319) Causes serious eye irritation. (H317) May cause an allergic skin reaction. (H412) Harmful to aquatic life with long lasting effects.

Hazard pictograms:

Signalword: Danger

Color:	grey
Substrate:	Aluminium Metall
System Components:	2C
Content:	0,40 l
a1:	82477031

Contact data

Title - optional

First name

Last name

Firm - optional

E-Mail

Phone - optional

Fax - optional

Question about item

Your question

I agree that my data as stated herein will be stored and processed for the purpose of facilitating communication with me. ()

Please note: This consent can be revoked at any time by message to us. In case of revokation your data will be deleted immediately. For more information, please read the Privacy Policy.