Spray Max -1K Plastic Adhesion Promoter spray (400ml)

SKU: 15-680009

Category: Plastic Primer

GTIN: 4015962853409

Ideal adhesion promoter for subsequent coatings on most plastics (comply with technical leaflet).

67,07

167,66 per 1 l

incl. 19% VAT , no shipping costs to DE. (Standard)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Technical Information

Application:

Priming and adhesion promoter for all common car and truck plastic parts, exterior

Substrates:

PP, PP/EPDM, ABS, SAN, PC, PA, PUR-RIM, RTPU, PPO, PBT, PUR soft foam, UP-GF plastics

Pretreatment:

Thoroughly clean surface and if necessary sand lightly when dry
Damage must be free of fat and dust and be dry
Clean substrate with SprayMax SprayMax Silicone Remover
The substrate must be free of external lubricants;
Annealing is recommended.
Shake the can well for 2 min. Make a trial spray.

Spray application:

1 light spray, approx. 1-2?m

Drying times:

Air drying 10min / 20°C
Can be painted over after 10min / 20°C

Recoatable:

Recoatable with all commercial quality fillers and topcoats, e.g. with SprayMax 1K Acrylic Filler, 2K High Build Filler, Plastic Paints, Basecoats, 2K Topcoats

Yield:

approx. 0.5m² - 1m² / spray can depending on the application thickness and substrate

Notes:

To be used by specialists only
Wear personal protection gear (respirator type: A2/P2 safety gloves, e.g. Latex or nitrile)
After finishing the painting process, turn the can over and spray the valve empty.
Dispose of the completely empty spray cans as recyclable material

Labelling according to Regulation (EC) No 1272/2008:

General notes:

(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P103) Read label before use. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P302) IF ON SKIN: (P352) Wash with plenty of water. (P305) IF IN EYES:(P351) Rinse cautiously with water for several minutes. (P338) Remove contact lenses, if present and easy to do. Continue rinsing. (P332) If skin irritation occurs:(P313) Get medical advice/attention. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F. (P501) Dispose of contents/container to …

Hazard statements:

(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated. (H315) Causes skin irritation. (H319) Causes serious eye irritation.

Hazard pictograms:

Signalword: Danger

Substrate:	Kunststoff
Color:	silbrig
System Components:	1C
Paint System:	1K
Content:	0,40 l
mp1:	3.1.7.4
a1:	82483031

Contact data

Title - optional

First name

Last name

Firm - optional

E-Mail

Phone - optional

Fax - optional

Question about item

Your question

I agree that my data as stated herein will be stored and processed for the purpose of facilitating communication with me. ()

Please note: This consent can be revoked at any time by message to us. In case of revokation your data will be deleted immediately. For more information, please read the Privacy Policy.