Spray Max - 1K Adhesion Primer spray red brown (400 ml)

SKU: 15-680001

Category: Anti-Corrosion Primer

GTIN: 4015962853003

Corrosion protection adhesion priming with very good adhesion characteristics. Suitable for bare, sanded and unsanded substrates. Cannot be worked over with polyester materials.

15,49 €

38,72 € per 1 l

incl. 19% VAT , plus (Standard)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Technical Information

Application:

Spot repair and part painting; also suitable for large areas.
Weld-through primer, rust protection priming, primer filler

Substrates:

Bare metal, sanded
Fully hardened paint, sanded
Spare-parts priming, sanded
Polyester substrates, sanded
Aluminium, sanded
Galvanized sheet metal in 3-layer structure, GRP

Pretreatment:

Completely derust the damaged area, thoroughly grind the surface and clean with SprayMax Silicone Remover.
Damaged area must be free of fat and dust and be dry.
Shake the can well for 2 min. Make a trial spray.

Spray application:

Weld-on primer: 1 = 6–10µm
Priming coat: 1–2 = 15–30µm
Primer filler: 2–3 = 30–50µm

Drying times:

Priming and welding primer: 10-15min. / 20°C
Prime filler: 15-60min. / 20°C, depending on coat thickness
IR drying possible (7min. short-wave IR radiation)

Post treatment:

Can be painted over with all commercial fillers and topcoats.
Do not work over with polyester and EP products.
Do not paint over with water borne paints.
Wet sanding with P800 or dry grind sand down with P400 – 500
SprayMax 1K ADHESION PRIMER has a 3 month open-air resistance on steel. At the same time, a dry film thickness of 50µm should not be exceeded.

Yield:

Approx. 0.5m² - 1m² / spray can depending on the application thickness and substrate

Notes:

To be used by specialists only
Wear personal protection gear (respirator type: A2/P2 safety gloves, e.g. Latex or nitrile)
After finishing the painting process, turn the can over and spray the valve empty.
Dispose of the completely empty spray cans as recyclable material

Labelling according to Regulation (EC) No 1272/2008:

General notes:

(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P103) Read label before use. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P261) Avoid breathing dust/fume/gas/mist/vapours/spray. (P271) Use only outdoors or in a well-ventilated area. (P273) Avoid release to the environment. (P305) IF IN EYES:(P351) Rinse cautiously with water for several minutes. (P338) Remove contact lenses, if present and easy to do. Continue rinsing. (P312) Call a poison center/doctor if you feel unwell. (P337) If eye irritation persists:(P313) Get medical advice/attention. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F. (P501) Dispose of contents/container to …

Hazard statements:

(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated. (H319) Causes serious eye irritation. (H336) May cause drowsiness or dizziness. (H412) Harmful to aquatic life with long lasting effects.

Hazard pictograms:

Signalword: Danger

Color:	red-brown
System Components:	1C
Content:	0,40 l
mp1:	3.1.7.4
a1:	82483031

Contact data

Title - optional

First name

Last name

Firm - optional

E-Mail

Phone - optional

Fax - optional

Question about item

Your question

I agree that my data as stated herein will be stored and processed for the purpose of facilitating communication with me. ()

Please note: This consent can be revoked at any time by message to us. In case of revokation your data will be deleted immediately. For more information, please read the Privacy Policy.