Product description
For corrosion protection of iron, stell, zinc, copper, galvanised surfaces, aluminium and other non-ferrous metals, e.g. on tiles and fibre-reinforced plastics (polyester) and hard PVC.
Product benefits
- Colour: white/ matt
- Excellent adhesion to difficult surfaces such as V2A or V4A steel
- Excellent anti-corrosion properties
- High chemical resistance
- Good adhesion to glazed or ceramic tiles
Application notes:
Spray pass:
Spray coat: 2 x approx. 80 µm
Flash-off time: 5min. each
Yield: ca. 7 m² for 20 µm / 1 m² for 100 µm
Dust dry: 12 min.
2K potlife: 16 h / 20°C
"
Labelling according to Regulation (EC) No 1272/2008:
General notes:
(P101) If medical advice is needed, have product container or label at hand. (P102) Keep out of reach of children. (P103) Read label before use. (P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P261) Avoid breathing dust/fume/gas/mist/vapours/spray. (P273) Avoid release to the environment. (P302) IF ON SKIN: (P352) Wash with plenty of water. (P305) IF IN EYES:(P351) Rinse cautiously with water for several minutes. (P338) Remove contact lenses, if present and easy to do. Continue rinsing. (P333) If skin irritation or rash occurs:(P313) Get medical advice/attention. (P337) If eye irritation persists:(P313) Get medical advice/attention. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F. (P501) Dispose of contents/container to …
Hazard statements:
(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated. (H315) Causes skin irritation. (H319) Causes serious eye irritation. (H317) May cause an allergic skin reaction. (H412) Harmful to aquatic life with long lasting effects.
Hazard pictograms:
Signalword: Danger
"
