Change the surface design quickly with SPRAYPLAST strippable lacquer. You can very individually design the look of e.g. your rims or other objects and car parts. If you do not like the colour any more, simply peel off the film, which has been sprayed on before.
We recommend not to paint rims with bright SPRAYPLAST colours, because the aggressive brake dust clearliy stands out and is difficult to clean. Repair: paint again with SPRAYPLAST or apply a protective coat of solvent-based clear lacquer.
SPRAYPLAST is not suitable to paint headlights, rear lights or other surfaces of polycarbonate.
SPRAYPLAST is not just suitable to design your rims, but you can also apply it on blank metal, all 2K coatings, paintable hard plastics and on glass. Even the large-area painting of e.g. car parts is possible, if you apply a sufficient thick layer.
Depending on size and structure of the rim, the content of a single aerosol could be sufficient for up to 2 rims. Set-packaging contains 2 aerosol cans of 400 ml and an additional adjustable spray nozzle for wide-spread paintings as well as a pair of disposable gloves.
Tip: The sprayed foil can be painted after drying - it remains peelable and so it is suitable for very individual paintings.
Properties
- Highgrade quality
- Quick-drying
- Protective coat against stone-chips, scratches, dirt, wetness
- Resistant to diluted acids, fats, oils
- Very good coverage
- Excellent adhesion on many materials such as metals, plastics (PP, PE, PVC), glass
- Not applicable on porous surfaces, e.g. wood, concrete, stone
- Good flow, smooth surface
- Suitable to paint indoor and outdoor objects
- Can be re-coated and afterwards peeled off with DUPLI-COLOR Acrylic-, NC-, Synthetic resin Spray Paint, Aqua, 2K lacquers, DUPLI-COLOR Alkyton, wall-paint (dispersion)
- Do not apply on 1K lacquers, but only on blank metals, 2K paintwork, original car paintwork.
- Very good resistant to customary cleaning agents (e.g. rim cleaner)
- Short-term resistant to car wash plants
Physical and Chemical Data
- Basis of the binder: caoutchouc-like polymere
- Colour: miscellaneous
- Smell: solvent
- Degree of gloss (at measurement angle 60° acc. to DIN 67530):
- glossy: 80-85 gloss units
- mat: 8 gloss units
- Efficiency:
- Depending on consistence and colour of the ground:
- 400 ml are sufficient for 0.2 - 0.3 m² (if 5 layers are applied)
- Drying time (at 20°C, 50% relative air humidity):
- Dust-dry: after approx. 10 minutes
- Dry to touch: after approx. 30 minutes
- Cured: after approx. 2 hours
- The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
- Temperature-resistant: approx. 100°C
- Storage stability:
- 10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%), storage in the closed, original container. Store frost-free.
- Size: aerosol cans, maximal nominal volume 400 ml