Product information
ColorMatic spot blender is universally applicable for spot blending of 1K and 2K clear coats as well as for 1K and 2K topcoats. It is specially formulated to ensure the overspray will blend into the transition zone, leaving no visible difference between the old and new paintwork. This reduces the need to polish.
Apply ColorMatic 2K Hi-Speed Clear Coats or 2K topcoats to the blended area, immediately after application.
Application:
Ideal for spot repairs.
Quality and Properties
- Essential for spot coating
- Additional coating to DupliColor Clear Coats and Auto-Sprays
- Simple time-saving processing
- Dissolves well
- Easy to polish
- Significantly reduces the need to polish
- Blends in seamlessly edge areas
Physical and Chemical Data:
- Basis of binder: Special resin
- Colour: transparent
- Smell: solvent
- Temperature resistance: to 90°C
- Storage stability:
- 10 Jahre bei sachgerechter Lagerung (=10°-25°C, relative Luftfeuchte von max. 60%)
- Size:
- Aerosol cans, maximum nominal volume 150 ml
Enviroment and Labelling
Environmentally sound
The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
Disposal
Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling
All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Using Instructions
Before use, carefully read and observe the warning texts on the label!
Application
- Shake can
- Test spray
- Immediately after applicaton of the lacquer, spray from a distance of 25 cm several thin caots into the outer zones
- After curing the outer zone can be polished
