Spray Max - 2K clear coat mat spray (400ml)

SKU: 15-680065

Category: clear-coat

GTIN: 4015962855779

2 component clear coat mat with very high chemical, petrol and weather resistance for high-quality and long lasting sealing of repairs and new paint jobs on vehicles and motorcycles.

18,49 €

17,49 €

43,72 € per 1 l

incl. 19% VAT , plus (Standard)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Technical Information

Application:

Touch-ups on parts and repair paint areas
Solvent and water-diluted basecoat systems after drying according to manufacturer’s instructions
Old paint, cleaned and sanded

Pre-treatment:

The substrate must be free of dust and fat. Shake can well for 2 min before use. Perform a trial spray.

Activate 2K:

Shake the can well for 2 min. before activating
Remove the red push button from the cap.
Turn can 180° and put the push button on the pin in the can bottom.
Turn the can with the cap upside down onto a stable base.
Press the red trigger button with the ball of your thumb until the limit.
After activating, shake can well for 2 min. once again.

Spray application:

1-2 spray applications
Approx. 30?m per spray application
Flash off time between the sprays: 10-15 min depending on temperature

Drying times:

12h at 20°C
35-30 min at 60°C
IR drying recommended

Application life:

48h at 20°C room temperature
The application life depends on the ambient temperature
Higher temperatures lead to shortened, lower temperatures to a longer pot life.

Gloss level:

High gloss

Yield:

Approx. 0.5m² - 1m² / spray can depending on the application thickness and substrate

Notes:

To be used by specialists only
Wear personal protection gear (respirator type: A2/P2 safety gloves, e.g. Latex or nitrile)
After finishing the painting process, turn the can over and spray the valve empty.
Dispose of the completely empty spray cans as recyclable material

Labelling according to Regulation (EC) No 1272/2008:

General notes:

(P210) Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P211) Do not spray on an open flame or other ignition source. (P251) Do not pierce or burn, aven after use. (P261) Avoid breathing dust/fume/gas/mist/vapours/spray. (P271) Use only outdoors or in a well-ventilated area. (P273) Avoid release to the environment. (P302) IF ON SKIN: (P352) Wash with plenty of water. (P305) IF IN EYES:(P351) Rinse cautiously with water for several minutes. (P338) Remove contact lenses, if present and easy to do. Continue rinsing. (P312) Call a poison center/doctor if you feel unwell. (P333) If skin irritation or rash occurs:(P313) Get medical advice/attention. (P337) If eye irritation persists:(P313) Get medical advice/attention. (P410) Protect from sunlight. (P412) Do not expose to temperatures exceeding 50°C/122°F. (P501) Dispose of contents/container to …

Hazard statements:

(H222) Extremely flammable aerosol. (H229) Pressurised container: May burst if heated. (H319) Causes serious eye irritation. (H317) May cause an allergic skin reaction. (H336) May cause drowsiness or dizziness. (H412) Harmful to aquatic life with long lasting effects.

Hazard pictograms:

Signalword: Danger

Color:	Transparent
System Components:	2C
Gloss level:	matt
Content:	0,40 l
mp1:	3.1.7.4
a1:	82476031

Contact data

Title - optional

First name

Last name

Firm - optional

E-Mail

Phone - optional

Fax - optional

Question about item

Your question

I agree that my data as stated herein will be stored and processed for the purpose of facilitating communication with me. ()

Please note: This consent can be revoked at any time by message to us. In case of revokation your data will be deleted immediately. For more information, please read the Privacy Policy.